Excalibur electronic H691 Home Safety Product User Manual


 
12 13
Using your unit
with regular batteries.
1. Turn the unit off.
2. Use your
BATTERY
COMPARTMENT DOOR
locat-
ed at the bottom of your
unit. Open the compartment
door with a coin or a screw-
driver.
3. Insert three C batter-
ies, not included. Be sure to
insert the battery with the
correct polarities (+ and -).
For more information on
the batteries, see pages 3
and 17.
4. Replace the batteries
when the sound becomes
distorted or the flashlight
becomes dim.
5. To utilize the back-up
batteries as the main power
source, slide
POWER switch
to the
AUX.BAT position.
Using the Flashlight
Your Forever Flashlight
10-in-1 Lantern includes an
ultra bright LED bulb and a
traditional white bulb. The
LED energy saving light
uses minimal power con-
sumption when turned on.
You then can switch to the
second option and use the
traditional light bulb.
Slide the
POWER SELEC-
TION switch to ON. This is
important unless you want
to access your
BACK-UP
BATTERIES
. Then switch
your
ON/BLINK/SIREN/OFF
to the ON position. This will
turn the
LIGHT function on.
Excalibur Electronics reserves the right to make technical changes without
notice in the interest of progress.
To turn off the flashlight,
switch the light switch to
OFF.
How to replace the
Flashlight Bulb.
Simply turn off your unit
and and open your
FLASH-
LIGHT COVER. Press the
rubber cover to release the
inner flashlight cover to
retrieve the spare light bulb.
Then simply reach into the
unit and replace the bulb.
Remember to when your
bulbs burn out to match
with similar voltage bulb.
Close the
FLASHLIGHT
COVER
and the light bulb
replacement process is
complete.
Using the Blinker
and Siren
To use the BLINKER, first,
slide the
POWER switch to
ON, this is important unless
you want to access your
BACK-UP BATTERIES. Then
select
BLINK/SIREN at your
POWER switch. This will
turn the
BLINKER function
on.
To use the
BLINKER and
SIREN simultaneously, first,
select the
BLINK/SIREN at
your power switch and then
turn on the
VOLUME knob.
This will turn the
BLINKER
function on. Then turn on
the
VOLUME knob.
Using the Radio
Your Forever Flashlight
10-in-1 Lantern can tune
the
AM/FM radio stations.
To use the radio, first, slide
the
POWER switch to ON,
this is important unless you
want to access your
BACK-
UP BATTERIES.