DIMENSIONS
16" (HN)
22" (HE)
3
3
⁄4"
19"
19" (HN)**
25" (HE)**
©2006 Pentair Filtration, Inc. 340026 NO06
23"
19" (HN)**
25" (HE)**
Pentair Filtration, Inc.
502 Indiana Avenue - P.O. Box 1047
Sheboygan, Wisconsin 53082-1047
Phone 866.873.7506 Fax 888.203.7361
International Phone 920.457.9435 International Fax 920.457.2417
www.everpure.com
SPECIFICATIONS
Dimensions
Single
24
1
⁄2"H* X 3
3
⁄4"W X 4
1
⁄2"D
Dual**
27
1
⁄2"H* X 19"W X 6"D
Triple**
27
1
⁄2"H* X 23"W X 6"D
*Height of the MD-HE and MD-HN are approximately 6" less
“H” dimension includes 2
1
⁄2" clearance for cartridge changing
Six-Pack Shipping Weights
MD-HN (6 pk) P/N 255349 Replaces P/N EV961004 11 lbs
MD-HE (6 pk) P/N 255351
Replaces P/N EV962304 16 lbs
Shipping Weight
Single Head 3 lbs (1.4 kg)
Dual Head** 7 lbs (3.2 kg)
Triple Head** 11 lbs (5 kg)
Operating Weight
Single HN 6.25 lbs (2.8 kg)
Single
HE 8 lbs (3.6 kg)
Inlet Connection
3
⁄8" Female Pipe Thread (single)
3
⁄4" Female Pipe Thread (twin and triple)
Outlet Connection
3
⁄8" Female Pipe Thread (single)
3
⁄4" Female Pipe Thread (twin and triple)
Service Flow Rate
MD-HN Single Head: 0.5 gpm (1.90 L/min)
MD-HE Single Head: 1.5 gpm (5.67 L/min)
Capacity
MD-HN 1,500 gal (5,670 L)
MD-HE 3,000 gal (11,350 L)
Working Pressure
10-125 psi (0.69-8.6 bar), non-shock
Maximum Temperature
35-100°F (1.7-37.8°C)
LIMITED WARRANTY OF PHYSICAL QUALITY
If, within eighteen months after manufacture or twelve months after purchase (whichever occurs rst),
any part of Pentair Water Treatment/Plymouth Products manufacture which is returned to its factory,
shipping charges prepaid, is found to be defective in material or workmanship in the judgement of
Pentair Water Treatment/Plymouth Products’ engineers, Pentair Water Treatment/Plymouth Products
will repair or replace such part at no charge, f.o.b., Sheboygan factory. Pentair Water Treatment/Plym
-
outh Products, however, shall not be liable for damages or delays caused by any defective material or
workmanship, or by failure of any parts due to normal wear and tear. Pentair Water Treatment/Plym
-
outh Products will not be responsible for products which malfunction due to user neglect or unauthor
-
ized modication.
NOTE: Some states do not allow limitations on how long an implied warranty lasts, so the above limita
-
tion may not apply to you. Similarly, some states do not allow the exclusion or limitation of consequen
-
tial or incidental damages, so the above limitation or exclusion may not apply to you. This warranty
gives you specic legal rights and you may also have other rights which may vary from state to state.
The MD-HN and MD-HE are Tested and Certied
by NSF International against NSF/ANSI Standard
42 for the reduction of Chlorine, Taste and Odor,
and Particulate Class I. Standard 53 for the
reduction of Asbestos, Cysts, and Turbidity.
** The Dual and Triple Head Assemblies are Not Performance
Tested or Certied by NSF.
Allow 2
1
⁄2" additional height for cartridge change on all
systems.