Filter
Top Products
5. INSTALLATION
(Vandal Dome)
1. Attach the Low Pro le Dome on the ceiling using the screws provided. Considering the camera
angle required for the viewing angle
2. Adjust the Lens Angle to the desired location.
3. Connect the Service Video Output Cable and check the video image. Change the Settings accordingly
using the OSD Controller.
4. After adjusting the Lens, install the Top Cover.
11
TAPPING SCREW (4 x 20L) - 3EA
*RUBBER GASKET:
Before assembling the top housing,
Be sure the Rubber Gasket is positionedcorrectly.
M4 STAR SCREW
L-WRENCH(T-20)
SERVICE VIDEO TEST CABLE
OSD CONTROLLER
<TILT ANGLE : 20~90°>
TILT: +90°
TILT: 0°
TILT: +20°
PAN: ±10°
PAN: 0°
<PAN ANGLE : ±10°>