Filter
Top Products
FEATURES OF STEAM CLEANER
2. Lightweight & Portable
3. Heavy-duty crush-resistant
hose.
4. Versatile, quick-change
accessories
4
1.Multipurpose Steam Cleaner:
Bathrooms, kitchens, living areas,
pet areas and appliances.
Automotive, patio and windows.
TIPS ON HOW TO USE YOUR SYSTEM
Water
• Use tap water for all your cleaning
needs.
• However, if you live in an area with
hard water, use distilled water
when steaming light colored
fabrics to eliminate the possibility
of hard water stains.
Important: Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the water used in
this appliance. Use tap water or
distilled water if the tap water in your
area is very hard.
Efficient Work
• For vertical surfaces, wipe with a
towel from the top down, in this
way the dirty water will not soil
surfaces already cleaned.
• Avoid changing brushes back and
forth while cleaning.
• Start with the smallest brush to
clean tight spots and corners first.
• Use a towel to wipe dirt as soon as
possible, otherwise it will dry and
re-adhere to the surface.
If you consistently use distilled water,
cleaning the tank is unnecessary.
Rinsing Out the Steam Cleaner
9
Normally, a periodic rinse of your steam
cleaner will free it from deposits. This is
recommended every 10-15 tankfulls, to
free up any scale deposits from the tank.
Fill the boiler with 8 oz. (125 ml) of water
and shake the cleaner vigorously. Tilt
the cleaner upside down to empty the
boiler of water and any scale deposits.
Descaling Your Steam Cleaner
If the tap water in you area contains a
high level of calcium deposits and you
have been using tap water to do your
steam cleaning, you should descale your
unit after 10-15 tankfulls.
1. Unplug the steam cleaner from the
power source before you descale the
boiler. Allow the unit to cool.
2. Fill the boiler with 1 part vinegar and
5 parts water and leave overnight or
for a period of approximately 8 hours.
Do not screw the safety cap onto the
steam cleaner while you are
descaling the boiler. Do not use the
steam cleaner while descaling
solution is inside the boiler.
3. After the period of soaking, turn the
steam cleaner upside down to empty
solution from the boiler. Due to the
fact that a small amount of solution
will be left in the boiler, it is necessary
to rinse the boiler out with clean water
2 or 3 times. Your steam cleaner is
now ready for use.
To Descale the Steam Cleaner
Care and Maintenance