Filter
Top Products
Assembling Your Vacuum Cleaner
Changing the Micro-Exhaust Filter
NOTE: Always remove the power plug from the wall outlet before
assembling or removing accessories.
Micro-exhaust Filter
1. Attaching the Flexible Hose into the Vacuum
Connect the flexible hose into the air intake
duct. Push in until you hear a “click”, indicating
it is in its position.
To remove the flexible hose, reverse the
operation.
2. Fitting the Extension Tube to the
Curved Wand / Hose Extension
Push the extension tube into the curved
wand / hose extension, as shown in the illustration.
1. Open the lid.
2. Remove the used micro-exhaust filter.
3. Insert a new micro-exhaust filter.
4. Close the lid.
Motor Thermostat
Fitting the Floor Brush to the Extension Tube
IMPORTANT: This motor is equipped with a heat sensitive thermostat. If
for some reason the vacuum cleaner will overheat, it will
then stop working automatically. When the motor will cool
off, the unit will restart by itself.
Extension
Tube
Push the extension tube into the Floor brush,
as shown in the illustration.
9
4