Filter
Top Products
SHIRRING FOOT
This special sewing foot is used for joining two pieces of fabric and shirring the bottom layer in one operation.
Preparing the sewing machine
Differential feed setting: set at “G” position
Stitch length: 3 to 4
Needles: use 1 or 2 needles
Thread tension: standard setting
Inserting the shirring foot
1. Raise the sewing foot.
2. Set the needle at its highest position.
3. Place bottom fabric layer (1) between needle plate and shirring foot
and insert up to upper knife.
4. Place top fabric layer (2) in opening (3) flush with the bottom layer
(right side to right side) and insert up to stop (4)
5. Lower the sewing foot.
6. Make a sewing test.
CORDING FOOT
This special sewing foot is used for sewing a cording tape between two layers of fabric in one operation.
Preparing the sewing machine
Differential feed setting: set at “N” position
Stitch length: 3 to 4
Needles: two needles or left one
Thread tension: standard setting
Inserting the fabric plies
1. Raise the sewing foot.
2. Set the needle at its highest position.
3. Place bottom layer (1), cording tape (2) and top layer (3)
(right side to right side) together under the sewing foot flush,
and insert up to the upper knife.
4. The cording (piping) must be placed under the groove (4).
5. Lower the sewing foot.
6. Make a sewing test.
EURO-PRO Operating LLC: Boston, MA, 02465
4400 Bois Franc, St. Laurent, Quebec
Tel. 1 (800) 361-4639
www.euro-pro.com