Filter
Top Products
Assembling Your Vacuum Cleaner
NOTE: Always remove the power plug from the wall outlet before assembling or removing
accessories.
1. Attaching the Flexible Hose into the Vacuum
Connect the flexible hose into the air intake duct.
Push in until you hear a “click”, indicating it is in
its position.
To remove the flexible hose, reverse the
operation.
2. Fitting the Chrome Telescopic Tube to the
Curved Wand / Hose Extension
Push the chrome telescopic tube into the curved
wand / hose extension, as shown in the
illustration.
Plastic
Knob
3. Extending the Chrome Telescopic Tube
Push forward the plastic knob and pull the
smaller tube outward.
Fitting the Floor Brush to the Telescopic Tube
Push the telescopic tube into the Floor
brush, as shown in the illustration.
3