Filter
Top Products
ASSEMBLY
1. To open the dust cup (container) (10), push button (1) and pull out the dust cup (10).
Verify that the dust cup filter (8) is inside, then attach the dust cup (container) (10)
to the hand vacuum.
2. To use the Hand Vacuum with the shoulder strap (5), attach it to the unit as shown below.
Note: Dust cup filter (8) must be used when operating the hand vacuum.
Warning: Always unplug from electrical outlet before opening the dust cup (container) (10).
TURBO HAND VACUUM
Model EP033
120 volts, 700 watts
3. To attach the cleaning brush (6) or crevice brush (7) to the Hand Vacuum, push brush
into the suction hole (3), as shown below.
4. To use the flexible hose (11), push the end of the hose into the suction hole (3), then
attach the desired brush (6 or 7) to the other end of the flexible hose (11), as shown
below.
6. Cleaning Brush
7. Crevice Brush
8. Dust Cup Filter
9. Holes for Attaching the Shoulder Strap
10. Dust Cup (Container)
11. Flexible Hose
1. Push to Open Dust Cup (Container)
2. On/Off Power Switch
3. Suction Hole
4. Handle
5. Shoulder Strap
3
2