Euro-Pro 1104HV Sewing Machine User Manual


 
NAME OF PARTS
2
NEEDLE REPLACEMENT
Caution: Remove the batteries and/or
disconnect the AC/DC adapter before starting
to replace the needle.
1. Turn the hand wheel to raise the needle to
its highest position.
2. Hold the old needle and loosen the needle
clamp screw. Remove the old needle and
discard responsibly.
3. Insert the new needle into the clamp with
the flat side toward the right. Be sure to
push the needle all the way up into the
needle clamp before tightening the needle
clamp screw.
4. Tighten the needle clamp screw.
SEWING SLEEVES
This sewing machine has been designed to
sew sleeves or any narrow openings in
garments.
1. Lift the presser foot.
2. Position the garment over the sewing arm
and between the platform and the base.
3. Lower the presser foot and follow the
regular sewing instructions.
CAUTION:
1. Don’t press the On/Off button at the same time as the foot control.
2. Don’t use the batteries and the AC/DC adapter at the same time.
3. Make sure that the batteries are inserted in the correct position.
4. Don’t keep the machine running for too long.
5. Sewing some very stretchy fabrics might result in skipping stitches – use a stretch
needle.
6. It is not recommended for use on sewing fabrics such as terrycloth.
7. Use AC/DC adapter (6V, 1A) or 4 AA alkaline batteries (1.5 V) only.
9