Filter
Top Products
5
THE EUREKA LIMITED WARRANTY
W
hat This Warranty Covers
Your Eureka cleaner is warranted to be free from all defects in material and workmanship
in normal household use for a period of one year. The warranty is granted only to the
original purchaser and members of his or her immediate household. The warranty is
subject to the following provisions.
W
hat This Warranty Does Not Cover
• Parts of the cleaner that require replacement under normal use, such as disposable dust
bags, filters, drive belts, light bulbs, brush roll bristles, impellers and cleaning.
• Damages or malfunctions caused by negligence, abuse, or use not in accordance with the
Owner’s Guide.
• Defects or damages caused by unauthorized service or the use of other than Genuine
Eureka parts.
W
hat The Eureka Company Will Do
The Eureka Company will, at its option, repair or replace a defective cleaner or cleaner part
that is covered by this warranty. As a matter of warranty policy, the Eureka Company
will not refund the consumer’s purchase price.
W
arranty Registration
Please fill out and return the warranty registration card accompanying your cleaner.
O
btaining Warranty Service
To obtain warranty service you must return the defective cleaner or cleaner part along with
proof of purchase to any Eureka Authorized Warranty Station.
You will find the nearest location in the Yellow Pages, under “Vacuum Cleaners–Service
and Repair.” Be certain that the Warranty Station is “Eureka Authorized.”
For the location of the nearest Eureka Authorized Warranty Station or for service information
visit www.eureka.com, or telephone toll free: USA: 1-800-282-2886, Mexico: 5670-6169,
Canada: 1-800-282-2886.
If you prefer, you can write to The Eureka Company, Service Division, 807 North Main
Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company,
866 Langs Drive, Cambridge, Ontario N3H 2N7.
If it is necessary to ship the cleaner outside your community to obtain warranty repair, you
must pay the shipping charges to the Eureka Authorized Warranty Station.
Return shipping charges will be paid by the Warranty Station. When returning parts for repair,
please include the model, type, and serial number from the data plate on the cleaner.
F
urther Limitations and Exclusions
Any warranty that may be implied in connection with your purchase or use of the cleaner,
including any warranty of Merchantability or any warranty for Fitness For A Particular
Purpose is limited to the duration of this warranty. Some states do not allow limitations
on how long an implied warranty lasts, so the above limitations may not apply to you.
Your relief for the breach of this warranty is limited to the relief expressly provided above.
In no event shall Eureka be liable for any consequential or incidental damages you
may incur in connection with your purchase or use of the cleaner. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary
by state.
.
For Genuine Eureka Value, Accept No Imitations!
THE EUREKA COMPANY
Bloomington, Illinois 61701
Brush Roll Belt and Light Bulb
The brush roll belt on the motorized nozzle drives the brush
roll to agitate, sweep, and comb the carpet nap. The belt
should be checked regularly to be sure that it is in good
condition. Replace the belt if it is broken, stretching, cracking,
or slipping. Cut away any hair or thread wound around the
brush roll or belt pulley because the buildup could cause the
belt to rotate unevenly.
How to Replace Worn Belt or Light Bulb
(On Some Models)
NOTE: Turn off the switch and unplug the electrical cord
before replacing belt or bulb. Pulleys can become
hot during normal use. To prevent injury, avoid
touching the pulleys when servicing the drive
belt.
1. Remove six screws from
bottom side. Turn unit
over; pull up on hood to
remove.
Replace light bulb,
if n ec ess ar y. Use
GENUINE EUREKA
re place ment bulb,
59045.
Continue to step 2
to change belt. Skip
to step 7 to replace
hood.
2. Lift out brush roll and
discard used belt.
3. Put new belt around
brush roll pulley first;
then the motor pulley.
4. Place left end cap into the
base.
5. Pull right end of brush
roll to stretch belt. Secure
right end cap into base.
6. Rotate brush roll to seat
belt.
7. Position hood; secure
with screws.
Use GENUINE EUREKA replacement belt, 58065A.
Motor Pulley
Brush
Roll
Pulley