Filter
Top Products
How to maintain brush roll
How to maintain turbo nozzle
Turn nozzle onto
back side. Remove
1 screw.
Rotate lower part of
cover down over brush
and lift off cover.
Clear blockage from
brush roll area. Use
scissors to clip
threads or hair.
Place cover back
into position.
Tighten screw.
1 2 3 4
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
11
How to use Brushroll Clean feature
• Make sure vacuum is on and brush roll
is turning. Handle position can be either
up or down.
• Press Brushroll Clean pedal for 10
seconds (Fig. 1). For stubborn debris,
repeat once.
For obstructions larger than hair or
thread, clean brush roll manually:
• Turn off vacuum and unplug power
cord.
• Step on handle release to lower
handle (Fig. 2).
• Turn vacuum face down on floor.
• Use scissors to clip heavy threads
or strings (Fig. 3).
C A U T I O N
Do not depress pedal longer
than 10 seconds each time.
2
1
3
10
10