Filter
Top Products
How to maintain brush roll
C A U T I O N
Make sure vacuum is turned off and
power cord is unplugged.
How to clean brush roll
• Check brush roll periodically and
remove debris.
• Step on handle release to lower
handle (Fig. 1).
• Turn vacuum face down on floor.
• Use scissors to clip threads or hair
(Fig. 2).
How to maintain turbo nozzle
Turn nozzle onto
back side. Remove
1 screw.
Rotate lower part of
cover down over brush
and lift off cover.
Clear blockage from
brush roll area. Use
scissors to clip
threads or hair.
Place cover back
into position.
Tighten screw.
1
1 2 3 4
2
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
11