Filter
Top Products
To view our “How to Assemble” demo, visit www.eureka.com/airspeed/assembly
Easy 4 Step Assembly
Hose Retainer
C
B
Fig 1: With the back-
bone (B) loosely on
the base (A), rotate the
backbone forward until
the vaccum is locked in
the upright position.
Fig 2: stand as shown
and push down on
backbone (B) valve to
snap into place. Pull up
to ensure the backbone
has locked properly.
Align so that the hose
retainer on the handle
(C) is facing the vacuum
front. Lower the handle
(C) onto the backbone
(B). Push down to snap
into place. Pull up to
ensure the handle has
locked properly.
Put dust cup (D) into
place on base. Push
cup handle toward
backbone (B) to snap
into place.
To attach hose con-
nector, align tabs
and lower hose onto
connector. Turn clock-
wise to lock.
Route hose (E)
through hose
retainer on front
of handle (C).
Put hose end (E)
into hook at base
of tool clips. Then
push hose into
clips.
Slide crevice tool
(F) into top of
extension wand
end (G). Place
into clips on
the side of the
vacuum.
Store dusting
brush (H) on
back of vacuum.
On some models:
Attach turbo
nozzle (I) to clip
on handle (C).
E
Hose
Retainer
E
C
G
H
I
Hose and Tool Storage
A
B
B
A
Alternate View
Fig. 1
Fig. 2
B
A
STEP
2
STEP
3
STEP
4
STEP
1