Filter
Top Products
IDENTIFY PARTS OF CLEANER
1. Cord Rewind Pedal.
2. On/Off Pedal.
3. Bag Indicator (on some models)
4. Hose Inlet
5. Bag Cover Latch (on inside top of bag cover)
6. Carrying Handle
7. Motor Filter
8. Disposable Dust Bag
9. Micron Filter Door
10. Electrical Plug
1
2
3
4
5
6
8
7
9
10
5
HOW TO USE
A carpet should be cleaned regularly over heavily traveled areas, and once a week
over the entire carpeted area. Vacuum slowly, making several passes (forward and
backward) over the carpet, covering small areas at a time. The time required to clean
the carpet will depend on several factors–including type of carpet and amount of dirt.
Connect Hose
Plug into electrical socket.
Push ON/OFF Pedal
(A thermostat automatically
shuts the motor off if it
overheats, see Automatic
Motor Shut-Off)
ON/OFF Pedal
1 2
3
4
Pull electric plug out from back of cleaner.
NOTE: When pulling on
electric cord watch for
a yellow line on the
cord. Then continue
slowly pulling on cord
till you see the red line,
stop. The red line indi-
cates the end of usable cord.