Filter
Top Products
2
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
How to Identify Parts of Vacuum Cleaner
Turbo nozzle
Filter cover, filter
and screen
(located inside dust cup)
Self-cleaning duster
Duster activation knob
Headlight
Height adjustment knob
Edge cleaner windows
On (I) / Off (O) power switch
On (I) / Off (O) brush roll switch
Dust cup
HEPA filter compartment
Check brush roll light
Brush roll reset button
Brush roll cover
Hose wand
Power cord
Hose retainer
Hose
D
usting brush
Hose hook
Tool caddy,
carry handle &
upper cord wrap
Nested crevice tool
& extension wand
Quick release
cord wrap
Handle release
Filter Maintenance Schedule
Maintenance Schedule is also located on back side of dust cup.
!
Assemble the vacuum cleaner before using. Moving parts. Make sure ON/OFF switch is in OFF (O) position before plugging in power cord.
DUST CUP – Empty after each use
HEPA FILTER HF10 – Replace within 6 months
FILTER DCF21 –Clean or replace regularly to maintain suction
Close bottom lid
until it clicks.
Align lid at front; press down
until lid snaps into place.
Rinse cover, filter and
screen; dry thoroughly.
Push lever to release bottom lid.
Debris will empty.
Empty cup. Pull back
latch to lift off lid.
Pull out filter cover,
filter and screen.
Reinstall filter cover,
and filter.
BRUSH ROLL – Clean monthly
Lift latch to
remove dust cup.
Lay flat and
unlock door.
Replace
filter.
Replace door
and lock.
Align tab on screen
with slot in cup.
LID WILL NOT CLOSE WITHOUT FILTER IN PLACE
Handle
Cogged belt
Brush roll
HEPA
Filter HF10
Screen
Filter cover
Filter
DCF21