Filter
Top Products
4
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to
routine maintenance. To avoid unnecessary service calls,
check the hose, dust cup and motor filter often. Clear a
clogged hose, empty the dust cup if it is full, and clean the
motor filter when it is dirty.
CAUTION: Turn off the power switch and unplug the
electrical cord before emptying the dust
cup or cleaning the dust cup filter.
CAUTION: Do not use the cleaner without the dust cup
filter properly installed. This can damage
the cleaner.
HOW TO USE (continued)
2
3
Pull the crevice tool out of the base of the cleaner.
Place the crevice tool on the end of the hose.
When cleaning is completed, store crevice tool back in
the base of the cleaner and replace the hose in the hose
adapter on the cleaner.
4
Hint: Some fine particles can restrict airflow very
quickly and will decrease performance even
before the dust container appears full. For that
reason, when vacuuming carpet fresheners or
cleaners, powder, plaster dust or similar fine
substances, the dust cup and filter may need
cleaning more often.
Dust Cup and Filter
1
Open
Cup
Pull back on the power switch to the "open cup" position
and lift dust cup away from cleaner.
Remove dust cup filter and dump dust cup in a waste
container.
The dust cup filter can be cleaned by brushing off over a
waste container. Do not allow to get wet.
The dust cup can be rinsed under running water and
completely dried before replacing on cleaner. We do
not recommend putting it in a dishwasher.
Replace dust cup filter in dust cup.
Put bottom edge of dust cup in cleaner as shown above
and rotate down against cleaner firmly. Dust cup latch
will automatically lock.
2
3
4