Filter
Top Products
NOTE: When pulling on electric cord watch for a yellow
line on the cord. Then continue slowly pulling on cord
till you see the red line, stop. The red line indicates the
end of usable cord.
8
9
10
1. Cord Rewind Pedal.
2. On/Off Pedal.
3. Bag Indicator (on some models)
3a. Tool Cover Latch
4. Hose Inlet
5. Bag Cover Latch (on top of bag cover)
6. Carrying Handle (on the bottom)
7. Variable Speed Control (on some models)
8. Exhaust Filter
9. Motor Filter (behind dust bag)
10. Disposable Dust Bag
11. Electric Cord
3
4
5
6
3
IDENTIFY PARTS OF CLEANER
1
2
7
3a
Pull electric plug out from back of cleaner push plug into
outlet. To rewind, step on Cordaway cord reel button,
hold and guide plug while it rewinds.
ASSEMBLY
HOW TO USE
A carpet should be cleaned regularly over heavily traveled
areas, and once a week over the entire carpeted area.
Vacuum slowly, making several passes (forward and back-
ward) over the carpet, covering small areas at a time. The
time required to clean the carpet will depend on several
factors–including type of carpet and amount of dirt.
3
4
Push ON/OFF Pedal
(A thermostat automatically shuts the motor off if it
overheats, see Automatic Motor Shut-Off)
Adjust brush height to high for bare floors (brushes
in down position) or low for carpets (brushes in up
position).
11
Attach wands
and cleaning tools
Slip the circular end of an
accessory tool onto the end
of the hose handle and twist
slightly to secure. If additional
reach is needed, place a wand
on the hose handle first.
Combination
Floor Tool
Open the Slip
Ring to reduce
suction.
1
1
2
2
3
4
1