Eureka 6750 Vacuum Cleaner User Manual


 
MAX
MAX
MAX
MAX
10
Fig. 3
Nozzle
Long
Lower
Wand
Detail A
Power Cord
Powerhead
Unit
Continued
Fig. 3 Push the nozzle at the bottom of
the cyclone unit into the top of the
long lower wand. Adjust the
position of the cyclone unit. Push
the long lower wand into the
powerhead unit. Plug the power
cord into the power cord retainer
at the top of the cyclonic housing,
see Detail A. Attach the Power-
Touch handle following instructions
in the owner’s guide.
Important Safety Information
- Do not vacuum surfaces which have
been subjected to inflammable solvents.
- Do not pick up any liquid.
- Do not pick up hot ashes which could
cause a fire.
Emptying
Empty the dust compartment of the
cassette after each use or when the dust
cup is filled up to the MAX level, Fig. 3.
Detach the dust cup by following the
instructions in Fig. 2b in reverse.
Empty the contents into a waste container.
To reattach the dust cup again follow the
described steps in Fig. 2b.
Maintenance
The Cyclonic Bag Saver can be washed
in cold or warm water and a mild
detergent. Thoroughly dry the dust
compartment with a soft towel before using
it again. If the cyclone unit clogs, use the
vacuum cleaner to unclog it.
Power-Touch Handle Units
Standard
Handle
Units
Fig. 3
Powerhead
Unit
Power Cord
Nozzle
Short Wand