Filter
Top Products
7
How To Operate Your Hand Vac
CAUTION:The hand vac is a very powerful unit. Make sure that you hold it firmly,
otherwise it can slip out of your hand and cause injury.
CAUTION:Always unplug from electrical outlet before opening the dust cup.
NOTE: Dust cup filter must be used when operating the hand vac.
1. Hold the hand vac firmly with your hand on handle.
2. Push the On (-) Off (0) power switch to “On (-)” position.
3. Start vacuuming.
Changing And Cleaning The Dust Cup Filter
CAUTION: Always unplug from electrical outlet before opening the dust cup.
1. To open the dust cup, push release button and pull off the dust cup.
2. Empty the dust from the dust cup and shake filters.
3. Occasionally rinse the dust cup filters in cold water. Then wait until they dry
completely before replacing them onto the hand vac.
4. Attach the dust cup to the hand vac.
CAUTION: Adequate airflow must be maintained at all times through the cleaner.
Any obstructions will cause the motor to overheat resulting in
permanent damage. See Automatic Motor Shut-Off on page 4.
Release
Button
Dust Cup
Filters