Filter
Top Products
6
Hose Retainers (4). Place hose in retainers to store hose on
unit.
Electrical Cord Hooks (2). Wrap electrical cord around them
to store electrical cord on unit. The upper cord hook rotates for
quick cord release.
Nested Wand Storage. The crevice wand stores inside the
larger wand.
Carrying Handle. Use this handle to carry unit from one place
to another.
Dusting/Upholstery Brush Storage. Store the dusting brush
on back of cleaner.
11
11
11
11
12
12
13
13
14
NOTE: WHEN UNIT IS RUNNING, DO NOT
ATTEMPT TO REMOVE ANY OBJECT
WHICH PREVENTS THE BRUSH ROLL
FROM TURNING.
First, turn off unit, unplug from the electrical
socket, then remove object from brush roll area.
Ex: sock, rug, etc.
Thermal Cut Off
This cleaner has a special thermostat that protects the cleaner
in case of motor overheating. If the cleaner suddenly turns
off, follow this procedure:
1. Push rocker switch to off (O) position.
2. Unplug cleaner.
3. Check for source of overheating problem (i.e. full dust cup,
blocked hose, or clogged filter).
4. If a full dust cup, blocked hose or clogged filter is found, empty
the cup, clear the hose or replace or clean the filters.
5. Wait at least 30 minutes before attempting to reuse the cleaner.
6. After 30 minute cool down period, plug the cleaner in and push
the rocker switch to the on (I) position. The cleaner should turn
on.
7. If the cleaner still does not operate, take it to any Eureka
Authorized Service Center for repair. Call 1-800-282-2886 for
the nearest Eureka Authorized Service Center to you.
15
QUICK REFERENCE
11
12
13
14
15