Eureka 5829 Vacuum Cleaner User Manual


 
Remove dust bag cover by lifting up on latch and
pivoting dust bag cover out and away from cleaner.
10
The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the dust
bag, filters, belt, and brush roll often.
NOTE: When vacuuming carpet fresheners or cleaners, powder, plaster dust, or similar fine substances,
the dust bag and filters will require more frequent maintenance.
NOTE: Turn off the switch and unplug the electrical cord before routine maintenance. Never operate the
vacuum cleaner without the dust bag or filter assembly in place.
21
Removing the Dust Bag (Style LS):
Grasp dust bag flaps and pull out from
cleaner.
Place the bottom of the dust bag cover on cleaner
lining up grooves on outer edge of cover with rails
on side of cleaner. Rotate cover up, pressing
against cleaner until it locks into place.
Reinstalling the Dust Bag Cover:
ROUTINE MAINTENANCE
Dust Bag
Flaps
Installing New Dust Bag:
Rails on
Cleaner
Grooves on
inside edge
of bag cover
BEND FLAPS FORWARD
PUSH BAG INTO HOUSING
POSITION BAG BOTTOM
BEHIND RIBS
PLACE BAG FLANGE
ON TOP OF SHELF
Latch