Filter
Top Products
CAP
MOTOR
PULLEY
1. Pull flexible cap
from front of nozzle.
2. Rotate belt off
motor pulley
3. Remove two screws from
underneath side of nozzle.
Lift off bottom plate.
Brush Roll
As the brush roll rotates it sweeps and picks up particles of dust. Keep brush roll free
from hair or thread so it continues to clean.
NOTE: Turn off power switch and unplug electrical cord before cleaning brush
roll.
Brush Roll Belt
The brush roll belt rotates the brush roll to provide better cleaning. The belt should be
checked regularly. Replace belt when it appears to be stretched or cracked and not
turning the brush roll properly.
NOTE: Turn off power switch and unplug electrical cord before replacing belt.
Belt pulleys can become hot during normal use. To prevent injury,
avoid touching belt pulley when servicing drive belt.
5
HOW TO MAINTAIN
Routine maintenance helps avoid unnecessary service calls. Be sure to check dust
bag and brush roll belt often to be certain vacuum cleaner works properly.
Detachable Dust Bag
The dust bag should be emptied often especially when vacuuming plaster dust or fine
sand. The fine particles clog bags and restrict air movement decreasing the cleaning
efficiency of the vacuum cleaner.
NOTE: Turn off power switch and unplug electrical cord before cleaning dust
bag. Never operate vacuum cleaner without dust bag.
1. Lift hook on each side of bag to
release bag.
2. Shake bag contents into
suitable container.
If further
cleaning is desired, brush
inside of bag with a whisk
broom.
3. Push bag over unit and press
until hooks snap over tabs.
NOTE: Never wash or dry clean cloth bag.
TAB
HOOK