Filter
Top Products
IDENTIFY PARTS
1. Dust Container
2. Release Button
3. ON/OFF Switch
4. Power Cord
5. Crevice Tool
6. Motor Filter
USING THE VACUUM CLEANER
1. Plug the power cord into a wall socket.
2. To switch on, move the on/off switch forward toward the dust container.
3. To switch off, move the on/off switch backward toward the handle.
To Use the Crevice Tool
1. Locate crevice tool on the bottom of the cleaner.
2. Grasp the end of the crevice tool nozzle and rotate out until it stops.
3. Then push the crevice tool firmly into the end of the cleaner nozzle.
4. After use, to store crevice tool pull the crevice tool out from the cleaner
nozzle.
5. Rotate back into the bottom of the cleaner until it snaps into place.
5
6
4
1
2
3
5
On back
of unit.
End of the
crevice tool
nozzle.