Eureka 54 Vacuum Cleaner User Manual


 
2
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
WARNING
To reduce the risk of fire, electric shock, or injury:
Do not use outdoors or on wet surfaces.
Do not leave vacuum cleaner when plugged in. Turn off the switch and
unplug the electrical cord when not in use and before servicing.
Do not allow to be used as a toy. Close attention is necessary when used by
or near children.
Use only as described in this manual. Use only manufacturer’s recommended
attachments.
Do not use with damaged cord or plug. If vacuum cleaner is not working as
it should, has been dropped, damaged, left outdoors, or dropped into water,
return it to a service center before using.
Do not pull or carry by cord, use cord as a handle, close door on cord, or
pull cord around sharp edges or corners. Keep cord away from heated
surfaces.
Do not use extension cords or outlets with inadequate current carrying
capacity.
Turn off all controls before unplugging.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Do not plug in or handle vacuum cleaner with wet hands.
Do not put any object into openings. Do not use with any opening blocked;
keep free of dust, lint, hair, and anything that may reduce airflow.
This vacuum cleaner creates suction. Keep hair, loose clothing, fingers, and
all parts of body away from openings and moving parts.
Do not use to pick up anything that is burning or smoking, such as cigarettes,
matches or hot ashes.
Do not use without a filter in place. When servicing the unit, never put fingers
or other objects into the fan chamber in case the unit would accidentally be
turned on.
Use extra care when cleaning on stairs.
Do not use to pick up flammable or combustible liquids such as gasoline, or
use in areas where they may be present.
Store your cleaner indoors in a cool, dry area.
Keep your work area well lighted.
Unplug electrical appliances before vacuuming them.
SAVE THESE INSTRUCTIONS