Filter
Top Products
ENGLISH
3
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
How to identify parts of vacuum cleaner
How to use vacuum and accessories
Get ready to vacuum
• Step on power switch to turn vacuum on (Fig. 1).
Place foot on brush roll cover and pull handle
back into position for vacuuming.
• For carpet, step on brush roll pedal to turn brush
roll on. For bare floors, make sure brush roll is
off. (Fig. 2).
To use accessories
Handle must be in upright position
when using accessories.
• Be sure handle is in upright position, and make
sure brush roll is off (Fig. 2).
• Press release button to remove wand from top
of cleaner (Fig. 3).
• To use tool directly on handle grip, press button
and remove wand (Fig. 4).
• Attach tool to end of wand or handle grip (Fig 5).
• Use crevice tool for baseboards, corners and
tight spaces.
• Use turbo nozzle for furniture and stairs.
• When vacuuming stairs, make sure vacuum
is below you, pushed against the bottom step
(Fig. 6).
Fig. 1 Fig. 2
Fig. 3
Fig. 4 Fig. 5
Fig. 6
Brush roll cover
Brush roll window
Handle grip
Wand
Dust cup release button
Filter compartment
Crevice tool
Dust cup
Carrying handle
Turbo nozzle
Handle release button
Power switch
Brush roll on/off pedal
Quick release upper
cord wrap
Hose support
Power cord
Lower cord wrap
Base hose