Filter
Top Products
2
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
How to Identify Parts of Vacuum Cleaner
EXT-U Belt
HEPA Filter
HF11
Screen
Filter
DCF21
Brush Roll
Telescoping Handle
(on some models)
Hose
Turbo nozzle
Filter and Screen
(
located inside dust cup)
Dust Cup
HEPA Filter Compartment
Height Adjustment Knob
Brush Roll Cover
Headlight
(on some models)
Cord Retainer
Maintenance Schedule
Maintenance Schedule is also located on back side of dust cup.
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Assemble the vacuum cleaner before using.
Plug Storage
Power Switch
ON (I) / OFF (O)
Crevice Tool
Hose Hook
Dusting Brush
Cord Reel
Carrying Handle
Hose Retainer
Handle Release
Cord Rewind Button
Telescoping Wand
(on some models)
Wand Retainer
Hose Connector
DUST CUP – Empty after each use
FILTER DCF21 –
Clean or replace regularly to maintain suction
BRUSH ROLL – Clean monthly
EXT-U BELT – Replace worn, cut or out of shape belt
Push button to release bottom lid.
Debris will empty.
Close bottom lid
until it clicks.
Empty dust cup. Pull
back latch to lift off lid.
Pull out filter cover,
filter and screen
Brush debris from filter,
cover and screen. Wash and
dry thoroughly, as needed.
Reinstall screen,
filter and cover.
Rinse dust cup;
dry thoroughly.
Align lid at front; press down
until lid snaps into place.
HEPA FILTER HF11 – Replace within 6 months
Remove dust cup.
Lift up tab on filter cover
and pull off.
Lift out filter
and replace.
Filter cover