Eureka 420 Vacuum Cleaner User Manual


 
HOW TO USE
Power Switch
1. Toggle the power switch to turn on I; toggle back to turn
off .
2. The nozzle allows for low profi le cleaning. Airfl ow under
the nozzle automatically directs suction to the edges and
corners for maximum full width cleaning.
4
HOW TO MAINTAIN
The instructions in this booklet serve as a guide to routine
maintenance. To keep the cleaner operating at top effi ciency
empty the dust cup and clean the fi lter after each use. To
maximize cleaner effi ciency do not allow the dust cup to be
lled past the bottom of the fi lter.
Empty Dust Cup
CAUTION: Turn off the power switch and unplug the
electrical cord to service.
1. Push dust cup release button.
2. Pull dust cup from main housing to empty.
3. Twist dust cup lid counterclockwise to release. The dust
cup fi lter comes out with the dust cup lid.
4. Shake and brush the dust and dirt from fi lter into waste
container. (To clean fi lter refer to dust cup fi lter section.)
5. Put lid back on dust cup. Reattach dust cup fi lter and lid
to dust cup by turning clockwise until the lock icons are
aligned. Be sure gasket on bottom fi lter is centered in the
inner tube.
6. Place bottom of dust cup in main housing. Push top of dust
cup back into place until it locks.
On/Off Switch
1
2
1
3
4
5
2
6