Filter
Top Products
10
HOW TO MAINTAIN (continued)
CAUTION: Turn off the switch and unplug the electrical cord before servicing
the cleaner. Pulleys can be hot from normal use, to avoid burns do
not touch pulleys.
Remove the 11 screws on the
bottom of the power nozzle. Flip
the power nozzle back upright and
remove the hood.
Remove broken or worn brush roll
belt. Pinch new brush roll belt
together and position new belt so
teeth engage cog pulley on end of
motor shaft.
Place the other end of belt around
brush roll. Align left end of brush
roll into the base by rotating
slightly until brush roll end cap
slides into place.
Secure right end of brush roll into
base.
The brush roll belt is now installed.
Reinstall hood.
1
Replace Brush Roll Belt
2
Cog
Pulley
3
4
Brush Roll
As the brush roll rotates, it sweeps and combs the carpet nap. Remove hair and threads
from the brush roll so it continues brushing the carpet nap. Check brush roll occasion-
ally for hair or string that may have wrapped around dowel. Remove with scissors.
When bristles have worn to about 1/4" in length, carpet cleaning effectiveness will be
reduced. It is time to replace the brush roll. Follow the instructions in the brush roll belt
section to open up the power nozzle and replace the brush roll.
5