Eureka 400 Vacuum Cleaner User Manual


 
Clean Dust Cup Filter
Clean the dust cup filter as necessary.
1. Remove dust cup.
2. Grasp handle inside filter and pull filter
out of dust cup.
3. Shake and brush the dust and dirt from
filter.
4. To replace filter, push filter into dust cup
so that flexible rim of filter fits securely
into dust cup.
5. If desired, remove filter from frame,
launder the filter by hand in warm water
using a mild detergent.
6. Air dry thoroughtly.
7. Replace filter on frame and reinstall in
dust cup.
Replace a dirty or torn filter. Order additional
dust cup filters from The Eureka Company,
Bloomington, IL 61701. Order dust cup filter,
part number 60958.
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to routine maintenance. Keep the
cleaner operating at top efficiency. Empty the dust cup after each use.
NOTE: Turn off the power switch and unplug the electrical cord to service.
Empty Dust Cup
1. Pull dust cup latch
up.
2. Swing dust cup out
from body and up
off the dust cup
hook on the body.
4. To replace dust cup, fit
dust cup down onto
hook.
5. Swing down and push
gently into body until
dust cup clicks into
place.
3. Remove dust cup filter
from the dust cup, shake
contents of dust cup into
a waste container.
Latch
Hook
7
NOTE: The dust cup filter is
not dishwasher safe. Do not
put in dishwasher.