Filter
Top Products
Appliance won’t start Electric plug Push plug securely into outlet. Verify power
on light is on.
Try another outlet.
Check circuit breaker.
No water in tank. Check the tank for water.
Appliance spits water Too much water in tank. Do not Check the water level in the tank.
out of nozzle. overfill.
Water condensed in wand and the Press steam delivery button and discharge
hose. any water that has formed in wand and hose
into a container. As soon as the appliance is
supplying steam only, direct steam jet
towards the floor and press steam delivery
button at least two or three times.
Not fully preheated. Allow more time for water to heat up.
Water boils out of fill spout Water tank too hot. Allow more time for cooling.
when adding water.
Add water slowly.
Use special funnel provided.
Accessories will not stay Not properly installed. Check for proper assembly.
on.
Review this guide for assembly instructions.
General questions. Assembly or related accessories. Call 1-800-438-7352 between 8:00 AM -
4:45 PM, Monday through Friday, central
standard time. Know the Model and Type
numbers when you call.
PROBLEM SOLVING
NOTE: Unplug the electrical cord before servicing.
PROBLEM CAUSE SOLUTION
11
3
3
3
3
3
3
3
3