Eureka 2999 Vacuum Cleaner User Manual


 
8
ENGLISH
HOW TO USE
WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all
other parts of body away from any moving part (such as
the revolving brush). Turn off the switch and unplug the
cleaner before changing the cleaner height setting.
ON/OFF Switch. International symbol I means On, International symbol O
means Off (FIG. 7).
Handle Release (FIG. 8). Step on handle release to pull handle back to a
comfortable operating position. To lower handle completely to the floor
(FIG. 9), depress handle release a second time.
Helpful Information:
Before cleaning under low furniture, check area first for objects that
might harm the unit or block the vacuum hose.
Cleaner Height Setting. An adjustment that raises or lowers the cleaner
base to match the type of floor surface. With the cleaner cord unplugged,
set the adjustment to lowest setting for maximum carpet cleaning. If the
cleaner is difficult to push, move adjustment to next highest setting
until cleaner is comfortable to push. The brushroll must reach the carpet
for effective cleaning. For ease in moving the adjustment knob, place handle
in operating position and tilt cleaner back to remove weight from front
wheels (FIG. 8).
Helpful Information:
Listen to your cleaner. If you notice a change in the sound of the motor
or a change in performance, it could simply indicate a common usage or
maintenance issue. Such as, a need to raise or lower the carpet height
adjustment, possible blockage in hose or brushroll area, or a broken or
loose brushroll belt. These are all easy to fix and the instructions are
included in this owner’s guide. Becoming familiar with the information in
this guide will help you to get the best possible performance from your
new cleaner for many years to come.
Note: While using accessories, do not place cleaner on furniture or
steps as the brushroll may cause damage. Place cleaner on
floor with the handle in storage position.
Step 1: To use accessories, place desired accessory into the end of the
hose or wand (FIG.10).
Dusting/Upholstery Brush is for furniture, blinds, books, lamp shades,
shelves, curtains, draperies, cushions and fabrics.
Crevice Wand cleans corners, stairs, baseboards, and between cushions.
Nested Extension Wands to add reach.
Step 1: Grasp both wands near ridges.
Step 2: Pull apart.
Step 3: Turn ridge end to center.
Step 4: Push wands together.
The instructions in the booklet serve as a guide to routine maintenance.
To avoid unnecessary service calls, check the top and bottom filters, belt
and brushroll often.
FIG. 8FIG. 7
FIG. 10
FIG. 9