Filter
Top Products
6
4. Remove front cover. Press down on handle latch
and lift cover away from cleaner.
Step D Store Electrical Cord
Step C Check Disposable Dust Bag
5. Check to be sure the paper bag inlet hole is secure
on the inlet tube.
6. Replace front bag cover. Place the tabs on the bottom
of the front cover into slots at bottom of bag
compartment and press cover against unit until it clicks
shut.
7. Next wind the cord around the two cord hooks on the
right side of cleaner. On some models the upper cord
hook turns to release the cord. Turn the hook up to
store the cord.
NOTE: For easier access to bag compartment, when
you store the electrical cord use a figure 8
pattern.
8. Secure the plug to the cord to prevent unwinding.
|
Handle
Latch
Inlet
Tube
Inlet
Hole
Cord
Hook
Cord
Hook