Eureka 200 Series Vacuum Cleaner User Manual


 
HOW TO MAINTAIN
Routine maintenance helps avoid unnecessary service calls. Be sure to empty dust
container and clean motor filter after each use to keep vacuum cleaner operating
efficiently. The filter must be securely attached before using. Failure to replace filter
will allow dust to enter motor section which will damage the vacuum cleaner.
Empty Dust Container
NOTE: Unplug electrical cord and turn off power switch before servicing. Never
operate vacuum cleaner without dust container.
Align and push motor
filter into top of dust
container. Be sure motor
filter is inside container
and seated on the ribs.
Filter
Dust
Container
Latch
.
Push latch
down.
Pull out
dust
container.
Position tab on bottom
of dust container into
slot; push down on
container until latch
securely snaps shut.
Remove motor
filter from dust
container and
empty contents.
.
7