Filter
Top Products
How to Use (continued)
Release handle from vacuum
by pressing the black button
release and pulling up on
handle.
Adjust telescoping handle by grasping vacuum firmly in one
hand while pushing button on handle forward and sliding
handle to desired length.
Stick vac can be used for
above the floor cleaning.
Hand Vac
Changing And Cleaning Dust Cup Filters
CAUTION: Always unplug from electrical outlet before
opening the dust cup.
1. To open the dust cup, push release button and pull dust
cup away from vacuum.
2. Pull filter cover and filter away from vacuum.
3. Empty debris from the dust cup and brush debris from
filter cover and filter.
4. Occasionally rinse the filter cover and filter in cold water.
Then wait until they dry completely before placing them
back on vacuum.
5. Place the dust cup filter into filter cover and place filter
cover back on vacuum.
6. Reattach the dust cup to the vacuum.
CAUTION: Adequate airflow must be maintained at all
times through the cleaner. Any obstructions
will cause the motor to overheat resulting in
permanent damage.
Release
Button
Filters
Dust Cup
Dust Cup
CAUTION: The hand vac is a very powerful unit. Make
sure that you hold it firmly, otherwise it can
slip out of your hand and cause injury.
1. Hold the hand vac firmly with your hand on handle.
2. Push the On (-) Off (0) power switch to “On (-)” position.
3. Start vacuuming.
4