Filter
Top Products
HOW TO MAINTAIN
The instructions in this booklet serve as a guide to routine maintenance. To keep the
cleaner operating at top efficiency empty the dust cup and clean the filter after each use.
Empty Dust Cup
Note: Turn off the power switch and unplug the electrical cord to service.
7
Latch
Handle
Dust
Cup
1. The telescoping handle must be completely
extended to remove the dust cup.
2. Push down on the top of the dust cup latch.
2. Pull dust cup from handle section and lift
from the nozzle.
3. Grasp the edge of dust cup filter and pull
out to remove.
Clean motor filter (refer to
dust cup filter section).
4. Shake contents of dust cup into waste
container.
5. Replace dust cup filter.
6. Fit dust cup and motor unit back together
and push firmly until latch clicks into place.
Dust Cup
Filter
How to Clean Dust Cup Filter
1. Separate dust cup from motor unit.
2. Pull dust cup filter out of dust cup.
3. Shake and brush the dust and dirt from filter.
4. If desired, launder the filter by hand in warm water using
a mild detergent.
5. Air dry thoroughly before returning to use.
6. Replace dust cup filter in dust cup. Fit dust cup and
motor unit back together and push firmly until latch clicks
into place.
Motor
Unit
Note: Turn off the power switch and unplug the electrical cord to service.
Clean the dust cup filter after each cleaner use.
Replace a dirty or torn filter. Order additional dust cup filters from The Eureka
Company, Bloomington, IL 61701. Order dust cup filter, part number 60796. To
place an order please telephone 1-800-438-7352.