Filter
Top Products
REFILL INDICATION
When both the bottle and the base are empty, the
display alternates the room humidity reading and
(FILL)
, indicating additional water is required.
At this time and refill unit according to the
instructions in the WATER FILL section.
CHECK FILTER INDICATOR
The ability of any humidifier to efficiently supply
humidity output relies heavily on the condition of the
filter. As the wicking filter loads with impurities it
gradually loses its wicking capability. When this
happens, moisture output is reduced and the
humidifier has to work longer to satisfy the selected
setting.
This humidifier has a check filter reminder timed to
appear after 720 hours of operation. When the display shows an alternating “CF”
and “room humidity” setting at 5 second intervals it is a reminder to check the filter
condition.
NOTE: Some areas have high water mineral content causing the need for more
Frequent wicking filter changes.
Reset the Check Filter “CF” function each time you replace a filter by unplugging
the unit from the power source, then plug it in again.
Refer to REPLACEMENT OF WICKING FILTER if a build-up of deposits or severe
discoloration is evident replace the to restore maximum efficiency.
REPLACEMENT OF WICKING FILTER
CAUTION: Before changing wicking filter, ensure unit is turned OFF.
CAUTION: To help prevent bacteria growth
and keep maximum efficiency, the wicking
filter should be replaced at least once per
season, or more often under hard water
conditions. Use AIRCARE
®
/Essick
®
/MoistAIR
®
MAF2 replacement wicking filter.
Replace the evaporative wicking filter at least
once per humidification season or more
depending on water conditions in your area.
Wicking Filter Replacement
1. Unplug humidifier. Before removing
the filter, we recommend moving the
humidifier to an area where floor
coverings are not susceptible to water
damage (i.e. kitchen or bath areas.)
2. Remove the water bottle and set aside.
Be sure not to bump or damage the fill valve.
7