Essick Air E27 000 Humidifier User Manual


 
4
How Your Humidifier Works
Your new Essick Air® Evaporative
humidifier is designed to satisfy home
humidity requirements through the
principle of evaporation of water in the
air.
Once the wick becomes saturated, air
is drawn in, passes through the wick
and moisture is absorbed into the air.
All evaporation occurs in the
humidifier so any residue remains in
the wick. This natural process of
evaporation creates no white dust like
some other humidifiers.
Set Up and Location
1) Unpack humidifier from carton and
remove all packaging material,
wick, etc. from box.
2) Place humidifier on a flat level
surface. Position the humidifier
where the most humidity is needed
or where the most air will be
circulated throughout the house
such as near a cold air return. If the
unit is positioned close to a window,
condensation may form on the
window pane. If this occurs the unit should be repositioned in another
location.
NOTE: Due to release of cool, moist air from humidifier, it is best to direct air
away from thermostat and hot air registers, and to position humidifier next to an
inside wall. Unit should not be placed where cold air from outside walls or warm
air from a hot air register blows directly on it.
3) Place the humidifier at least 4 inches from the wall.
CAUTION: Do NOT position the unit directly in front of a hot air duct or radiator.
Do NOT place on soft carpet. We suggest placing the unit on a table or on a
bookshelf.
Air is drawn
in through
the vents
in the back
Humidified air is
expelled out the
front louvers
For Reference Only
When Outdoor
Temperature is
:
F C
Recommended
Indoor Relative
Humidity (RH) is
-10°
10°
20°*
-24°
-18°
-12°
-6°*
20%
25%
30%
35%
* or higher