Filter
Top Products
be careful not to pressurize them
by over filling. Bottle damage
can result from this. A fill hose is
provided with your humidifier
which will fit most faucets. The
faucet connector can be rolled
back over itself to better fit
small diameter or short faucets.
Place water bottles into the
humidifier with the valve cap
end down and to the back of the
humidifier so that the valve cap
enters the water channel.
9) We recommend using Bemis by
Essick Air Bacteria treatment
whenever you refill the water
bottles to eliminate bacterial
growth. Add bacteriostat
according to the instructions on
the bottle and then tighten the
valve caps on your water bottles.
10) Place the top frame onto the
cabinet. NOTE: The top frame
has hinge pins along the back
edge which engage into the
hinge brackets along the top
back of the cabinet. This feature
allows you to lift the top frame
off vertically for easy cleaning,
and also allows the top frame to
pivot up for easy access to the
control panel and water bottles.
11) Plug cordset into interlock
receptacle on back of unit.
12) Plug cordset into wall
receptacle. Humidifier is
now ready for use.
13) Open the top frame by lifting
along the front edge. The
variable speed fan control
allows you to use a low setting
for the most quiet operation or a
high setting for maximum output.
14) All models have an automatic
humidistat. The humidistat will
turn the humidifier on when the
relative humidity in your home is
below the humidistat setting and
will turn the humidifier off when
the relative humidity reaches the
humidistat setting. For initial
operation set the humidistat in
the "comfort zone" and adjust
up or down from there to
achieve the desired humidity
level.