Essick Air 4D6 800 Humidifier User Manual


 
10) Empty water channel after 20
minutes. Rinse with water until
bleach smell is gone. Dry with
clean cloth or paper towel.
11) Clean all surfaces of the
chassis/power pak with a soft
dry cloth. ÌWARNING
DO NOT USE LIQUID
CLEANING SOLUTIONS,
INCLUDING WATER, TO CLEAN
THE CHASSIS/ POWER PAK.
AN ELECTRIC SHOCK MAY
RESULT OR THE HUMIDIFIER
MAY BE DAMAGED.
12) Remove water bottle cap and
empty remaining water into a
drain. Pour a mixture of one pint
of water and two tablespoons of
household bleach into each bot-
tle. Replace caps and shake bot-
tles thoroughly. Remove caps,
drain bottle into sink, rinse well
with fresh water.
13) Replace evaporative wick into
water channel, allowing it to
hang from the rib on the inside
back wall of the cabinet.
14) Replace chassis/power pak unit
into cabinet, ensuring that the
chassis seats correctly on the
back edge of the cabinet.
15) Replace water bottles into cabi-
net.
16) Replace end covers onto cabi-
net.
17) Plug cord set into interlock
receptacle at back of unit. Plug
cord set into wall outlet.
18) Reset humidistat to desired set-
ting and adjust fan speed.
EVAPORATIVE WICKS
19) We recommend replacing the
wick at least once a season,
more often in hard water areas.
When the wick appears exces-
sively clogged with mineral
deposits, discard it and restore
your humidifier's efficiency with
a new wick. Bemis by Essick Air
number 1041 fits all console
humidifiers.
Call 1-800-547-3888 to order.
Only Bemis by Essick Air evapo-
rative wicks guarantee the certi-
ed output of your humidifier.
Use of a wick other than a
Bemis by Essick Air will void
your warranty as well as the
certification of output and may
reduce the efficiency and output
of your humidifier.
!