Filter
Top Products
Figure 1 - Installation of 18-MH, 50-SHW15 and 50-TRW15 using Pre-Manufactured Chimney
Note on Outside Air Hookup: You can use an outside air hookup with our catalytic stoves. We highly recommend it
for homes built since the more air-tight construction standards went into effect. This involves connecting a metal
pipe (usually three inches (3”) in diameter - check your stove - and the pipe can be flex or rigid) from the air inlet
p
ipe located on the bottom rear of the stove through your floor or wall. The outside end of this pipe should be
covered in some manner (i.e. with a screen) to keep it clear of foreign matter. It is necessar
y
to use this hookup if
installing in a mobile home or double-wide.
Figure 2 - Installation of 18-MH, 50-SHW15 and 50-TRW15 using Masonry Chimney