25741-0-0309Page 10
unit will be used in. If no clearances to combustibles are listed, the
must be 6" from any combustible wall. The ceiling must be at least
Y
opening. Non-combustible material must extend at least 12"
combustible material behind it.
Heat resistant materials such as slate and marble must be
If your installation does not meet the above clearances, you must
proceed to one of the following steps:
A
C
VFSUR18 22 17 17
VFSUR24 28 17 18
VFSUR30 32 17 18
instructions are minimum clearances to maintain in installing this
heater. Left and right clearances are determined when facing the
front of the heater.
Make sure that glass doors are open during all operations of
the logset. The opening of the glass door frame should be the
Follow these instructions to ensure safe installation.
12" or more Non-combustible material.
Less than 12" Non-combustible material must be ex-
tended to at least 8" with the installation
cannot extend non-combustible material
at least 8", you must operate heater with
28”
12”
HEATER IN FIREPLACE
OR FIREBOX
HEAT RESISTANT
MATERIAL 12”
WITHOUT HOOD
10” and less Mantel
10” and less Mantel
12”
28”
cLeArANceS
