Filter
Top Products
Page 6 20176-3-0107
Apply loose material (glowing embers) per appropriate Installation
Instructions and Owner's Manual. Replacement of loose material
(glowing embers) must be purchased from Empire Comfort
Systems, Inc. Application of excess loose material (glowing embers)
may adversely affect performance of the heater. WARNING: All
previously applied loose material must be removed prior to
reapplication.
Replacement Loose Material (glowing embers) Part Number
LS-18P 15999
LS-24P 15970
LS-30P 15970
Platinum Bright Embers PE-20-1
Note: A single layer of embers is to be used when applying Platinum
Bright Embers (alone or in combination with production embers)
to the burner.
Log Placement
LS-(18, 24, 30)P Logs
Figure 5
Attention: Do not use Figures 1 to 5 to order replacement logs.
Refer to Page 11, Parts List and Parts View to order
logs for your appropriate model number.
The following WARNING applies when log set is installed onto
an unvented gas burner assembly.
WARNING: This appliance is equipped for (natural or
propane) gas. Field conversion is not permitted.
LOG PLACEMENT
A
B
C
D
E
F
G
H
I
J
K
L
M