Emerson Process Management SCADA RTU Water Pump User Manual


  Open as PDF
of 6
 
Product Data Document
420DS-12A
October 1, 2007 - Page 4
Integrated Pump Control
SCADA RTU
Website: www.EmersonProcess.com/Remote
Remote Automation Solutions
Theinitialcongurationsetupispresentedinastep-
by-step procedure using a question and answer for-
mat. Once familiar with the procedures, individual
congurationpagescaneasilybeaccessedrather
than using the Q & A format.
A station overview display is also provided to show
pump run status, local/remote operation, and instan-
taneousvaluesofpressure,owandlevel.
Setupandcongurationmayalsobeperformed
from the integral display/keypad on the ControlWave
PLC/RTU SCADA package or via the SCADA
systemhostHMI.Allcongurationparametersare
made available to OPC servers for compatibility with
our OpenEnterprise SCADA software as well as
third party SCADA software packages.
Thecongurationpagesallowyoutosetthecom-
munication address and parameters, select station
control mode parameters, enter setpoints and alarm
limits, modify zero and span for analog inputs, add
permissives and interlocks, and perform pump
startups.
Q & A Conguration
Conguration Page
I/O Conguration
Loop Control Page
 previous next