Filter
Top Products
Mechanical Considerations
10
Figure 9 Overall dimensions with removable coupling
4.2 Determining Placement in the Conditioned Space
Refer to site-specific drawings for exact placement. Efficient cooling of the rack equipment depends on
proper placement of equipment, proper use of blanking plates in any voids in the rack, and good cable
management.
The Liebert XDR is engineered to fit the rear of computer enclosure cabinets. Figures 7, 8 and 9
illustrate the module's dimensions and the location of pipes.
Ensure that there is 25.6" (649mm) clearance in the rear to allow the door to open fully.
1-1/2"
(38mm)
1-5/16"
(33mm)
1-1/2"
(38mm)
78-3/8"
(1991mm)
80"
(2032mm)
5-7/8"
(149mm)
20-1/2"
(520mm)
110deg
23-1/2" (597mm)
7/8"
(22mm)
27-3/8" (695mm)
6-1/2"
(165mm)
2-1/8"
(54mm)
25-5/8"
(651mm)
27-3/8" (695mm)
Piping is not load-bearing and
should never be used to lift or
move the Liebert XDR.