Emerson HD7005 Humidifier User Manual


 
WARNING: For your own safety, do
not use humidifier if any parts are
damaged or missing.
1. Place humidifier on a flat level surface in
area of house where most humidity is
needed, or an area which would likely
result in moist air being circulated
throughout the house, such as near a
cold air return. Placing the unit level is
very important if the humidifier is locat-
ed on carpeting.
Moist air (humidity) produced will dis-
perse into the whole house, but area
closest to the unit will have the highest
humidity. If the unit is positioned close to
a window, condensation may form on
the window pane. If this is not accept-
able, the unit should be repositioned in
another location.
NOTE: Due to release of cool, moist air
from humidifier, it is best to direct air
away from home thermostat and hot air
registers. It is best to position humidifier
Location Instructions
Water Fill
WARNING: To reduce the risk of
shock, always unplug humidifier
before cleaning or servicing.
WARNING: To reduce the risk of fire or
shock hazard, do not pour or spill
water into control or motor area. If
controls get wet, let them dry com-
pletely and have unit checked by an
authorized service personnel before
plugging in.
This humidifier is designed for use with the
water bottle located under the bottle cover
to the left of the fan assembly. The unit
should be positioned where it will be oper-
ating.
next to an inside wall. Hot air registers
and cold air from outside walls can affect
the efficiencies of the controls. Unit
should not be placed where warm air
from a hot air register blows directly on
unit.
2. The humidifier should be positioned with
the back (cord exit side), at least 2 inch-
es away from the wall. Air needs to enter
through louvers in the rear panel in order
for the humidifier to operate at peak effi-
ciency.
At Least 2" From Wall
Bottle Cover
Water
Bottle
5