Filter
Top Products
3. a. Remove the two filters and dispose
of properly.
b. Clean internal parts of the humidifier
per the “Cleaning Your Humidifier”
section of your owner’s manual.
c. Install new filters inside the cabinet
with the glue beads on the filter fac-
ing the center of the cabinet. Make
sure the filters are resting on the
floor of the cabinet.
d. Return the filter housing to the cabi-
net. Position the filter housing onto
the filters. Align the back of the filter
housing over the filters and between
the rear ribs of the cabinet. Place the
filter housing down onto the filters.
Make sure the filters are captured
inside the side flanges of the filter
housing.
e. Position fan assembly onto the cabi-
net. Make sure the fan venturi (low-
est cylinder section below the fan) is
placed inside the filter housing. The
left edge of the fan assembly hous-
ing should rest in the groove of the
cabinet.
f. Replace water bottle and the water
bottle cover. The right edge of the
water bottle cover should rest in the
groove of the cabinet.
4. The unit is ready for use or to be stored
away for the next season.
Replacement and Care of Filters (continued)
Glue Beads
Fan Assembly
“Channel Area”
Groove In
Cabinet
for Water
Bottle
Cover
Filters
Water Level
Float
Water Level
Float
Filter
Housing
Cabinet
Float
Retainer
Float
Retainer
10