Filter
Top Products
4
BEFORE STARTING
1 Open the dustbag cover.
2 Check that the dustbag is in place.
3 Insert the hose until the catch clicks to engage (press
the catch to engage hose).
4 Attach the extension tube (Z4520) or the telescopic
tube (Z4590) to the hose handle and the floor nozzle.
5 Pull out the cable and plug it in. Press the foot pedal to
rewind the cable (take hold of the plug to prevent it
striking you).
6 Press the On/Off button with control your foot to start
the vacuum cleaner.
7 Adjust the suction power using the linear potentiometer
button on the vacuum cleaner or the suction control on
the hose handle.
GETTING THE BEST RESULTS
Hard floors: Use the dual purpose floor nozzle with the left
pedal in position (8).
Carpets: Use the dual purpose floor nozzle with the left
pedal in position (9).
Reduce suction power for rugs and fabrics.
Upholstered furniture: Use the upholstery nozzle.
Skirting boards, crevices, corners, etc.: Use the crevice
nozzle.
Lamps, pictures and bookshleves: Use the dusting
brush.
Short-pile carpets, for stubborn fluff and pet hairs: Use
the turbo nozzle.
1
4
7
89
5
6
2
3
Z45xx_ifu_2.qxp 2005.04.27. 10:59 Page 4