Electrolux EAS(C,E)18P5ASK(W,S,M) Air Conditioner User Manual


 
ON/OFF: Push this button to start
operation, push the button again to
stop operation.
MODE: Each time you push the
button, a mode is selected in a
sequence that goes from AUTO,
COOL*, DRY, HEAT and FAN, as the
following figure indicates:
* Note: Only for heating and cooling
models.
SWING: Push this button, the
louver would swing up and down
automatically. Push again to stop it.
SLEEP: Press this button to go into
the Energy-Saving operation mode.
Press it again to cancel. This
function is only can be used on
COOL, HEAT and AUTO mode and
maintain the most comfortable
temperature for you.
Note: While the unit is running
under SLEEP operation mode, it
would be canceled if you press the
other button.
FOLLOW ME (on some
models): Push this button to initiate
the Follow Me feature, the remote
display is actual temperature at its
location. The remote control will
send this signal to the air
conditioner every 3 minutes interval
until press the Follow Me button
again. The air conditioner will beep
to indicate the Follow Me feature
has ended if it does not receive the
signal during any 7 minute interval.
1
2
3
4
5
Remote control description
35 electrolux remote control description
DIRECTION: Press this button to
change the swing angle of the
louver. The swing angle of the
louver is 6o for each press. When
the louver swing at a certain
angle which would affect the
cooling and heating effect of the
air conditioner, it would
automatically change the swing
direction . No symbol will appear
in the display area when press
this button.
RESET: When you press the
recessed RESET button, all
current settings are cancelled and
the control will return to the initial
settings.
TEMP/TIME: Push the
button to increase the indoor
temperature setting or to adjust
the TIMER in a clockwise
direction. Push the button to
decrease the indoor temperature
setting or to adjust the TIMER in
a counter-clockwise direction.
FAN SPEED: Used to select the
Fan Speed in four steps- AUTO,
LOW, MED or HIGH. Each time
the button is pressed, the fan
speed mode is shifted.
TIMER: This button is used to
preset the time ON(start to
operate) and the time OFF(turn off
the operation).
6
7
8
9
remote control description electrolux 36
10
AUTO
COOL DRY HEAT* FAN
AUTO
LOW MED HIGH
1
11
2
10
12
13
6
8
14
9
15
7
3
5
4
1
11
2
10
12
13
6
8
14
9
15
7
3
5
4