Filter
Top Products
DESIGN LED 36 BRICK™
©Elation Professional, Los Angeles Ca. 30 www.ElationLighting.com
10. LENS REPLACEMENT
The Design LED 36 Brick comes with a removable front cover that allows lens assembly to
be changed out to achieve different beam angles.
The lens cover is held in place by two ¼ turn locking fasteners. To remove the cover; 1) Turn
the locking fasteners in a counter-clockwise direction. 2) Once the fasteners are loose lift the
cover straight up to access the four individual lenses (see first illustration below). 3) Locate
the 8 securing screws on the inner cover and remove them. 4) Remove the inner cover to
access the lenses (see second illustration below). Once the lenses are changed reassemble
in reverse order.