EdgeStar EAC420 Fan User Manual


 
TIMER OPERATION
The TIMER can be used to switch the product off after a
selected number of hours.
Turn the unit on.
Select the desired operating mode, speed, etc.
Press the TIMER button once and the product will switch
off after 1 hour. Press the button again for 2 hours, again for
3 hours etc. The maximum timer setting is 8 hours. The LED
display will show the number of hours the timer is currently set
for.
To cancel the Timer setting press the TIMER button again
until all the timer indicators are dark.
REMOTE OPERATION
POWER: This button
turns the unit ON or OFF.
MODE: This button turns
the COOL MODE on or
off.
SPEED: This button
toggles through the fan
speeds
TIMER: This button
controls the TIMER
SWING: This button
adjusts the louver swing.
a) To replace the batteries, remove the cover of the battery
compartment. Install two AAA 1.5V Batteries, and then
replace the cover.
b) The effective operating range of the remote control is
about 13 feet in front of the unit and about 10 feet on the
side.
c) Take out the batteries if the remote will not be used for a
long period.
d) Replace the batteries as soon as the remote control does
not work normally.
e) Do not allow children to use the remote as a toy.
6
SPECIFICATIONS
Model No. EAC420
Voltage 120V
Frequency 60Hz
Wattage 250W
Net Weight 23 pounds
PARTS DESCRIPTION
1
Top cover 9 Air vent
2
Handle 10 Front cover
3
Horizontal louvers 11 Water level
4
Left side 12 Remote control
5
Front cover ornament 13 Remote control holder
6
Power cord hole 14 Right side
7
Caster wheels 15 Water inlet panel
8
Top cover lid 16 Drain
3